Hyundai R220LC-9S | 2019 | 6,000hrs | Excellent Condition

Hyundai R220LC‑9S | 2019 | 6,000 Hours | Excellent Condition

At Rich Reach, we are proud to offer a well‑maintained Hyundai R220LC‑9S – a modern, fuel‑efficient 22‑ton excavator with very low hours. With only 6,000 original hours and a documented service history, this machine is in excellent mechanical and cosmetic condition. It is ideal for contractors who want a reliable, productive machine without paying new prices.

Machine Overview

Brand: Hyundai
Model: R220LC-9S (Long Carriage, Tier 3 / Stage IIIA engine)
Year of Manufacture: 2019
Operating Hours: 6,000 hours (verified, original hour meter)
Serial Number: HHKR220xxxx (available on request)
Origin: Imported from South Korea, single owner, used on residential and commercial site development.

Key Selling Points

✅ Low Hours – Only 6,000 Hours

6,000 hours over 6 years averages just 1,000 hours/year – well below the typical 1,500‑2,000. This means minimal wear on the engine, hydraulic pump, undercarriage, and pins/bushings. You are buying a machine that still has the majority of its service life ahead.

✅ Excellent Mechanical Condition – Verified by CCIC

We commissioned a full CCIC pre‑shipment inspection in April 2026. The inspector’s summary: “Machine is in very good condition, no significant defects, all functions operate properly.”

Engine (Hyundai / Cummins QSB6.7):
• Cold start: immediate, minimal white smoke (warm‑up)
• Hot idle: smooth, no misfire or unusual vibrations
• No oil leaks – valve cover, oil pan, turbocharger lines all dry
• Turbocharger: spins freely, no axial play
• Oil analysis at 5,900 hours: wear metals within Cummins guidelines

Hydraulic System:
• Main pump (Kawasaki K3V112): pressure 34.0 MPa – very healthy
• Pilot pressure: 3.9 MPa – stable
• Cylinder drift test (boom fully raised): less than 2cm drop in 5 minutes – excellent
• No hydraulic leaks – hoses and fittings dry
• Hydraulic oil sample: ISO cleanliness 17/14/11 – good

Undercarriage – 70% Remaining Life
The original owner worked mostly on clay and gravel, not rock. Undercarriage components are in very good shape:

• Track chains: 70% remaining (minimal stretch)
• Sprockets: 70% remaining
• Track rollers: 75% remaining
• Carrier rollers: 80% remaining
• Front idlers: 70% remaining
• Track shoes (600mm double grouser): 70% remaining

You will not face undercarriage costs for at least 3,000‑4,000 hours – a major saving.

✅ Fresh Pins & Bushings – Tight Working End

We have inspected all critical pivot points. The boom‑arm joint, arm‑bucket joint, and bucket linkage show minimal wear – only 15‑20% slop measured. No replacement is needed at this time. However, we did proactively replace the bucket cylinder pin and bucket linkage pins as a preventive measure (March 2026). The digging end feels tight and precise.

✅ Cab & Comfort – Excellent for Operator

Hyundai’s cab on the 9S series is spacious and well laid out. This unit’s cab is near‑pristine:

• Seat: air suspension, fabric intact, adjustable armrests
• Air conditioning: factory installed, tested at 10°C output – very cold
• Heater: functional
• Monitor: full digital display, no warning lights, all gauges working
• Joysticks: pilot controls, smooth, no excessive play
• Foot pedals: responsive, spring return works
• Radio, wipers, washers, horn – all functional
• Interior trim – clean, no damage

✅ Hyundai R220LC-9S – Key Advantages

• Cummins QSB6.7 engine – widely supported globally, known for reliability and fuel efficiency.
• Kawasaki hydraulic pump – durable and serviceable.
• Long carriage (LC) – added stability for deep digging and heavy lifting.
• CAPO (Computer Aided Power Optimization) system – allows operator to select power modes (P, S, E) to match work and save fuel.
• Strong resale value – Hyundai excavators hold value well in emerging markets.

Specifications Summary

• Operating weight: ~22,100 kg
• Engine: Cummins QSB6.7, 6‑cylinder turbo (167 HP / 125 kW)
• Bucket capacity: 0.9‑1.3 m³ (1.1 m³ bucket included, teeth 70% remaining)
• Max digging depth: 6.9 m
• Max reach at ground level: 10.2 m
• Swing speed: 11.2 rpm
• Travel speed: 3.1 / 5.2 km/h

Recent Maintenance Performed (April 2026)

We have completed the following to ensure the machine is ready for immediate work:

✔ Engine oil & filter change (Cummins 15W-40, genuine filter)
✔ Hydraulic return filter replaced
✔ Fuel filter and water separator replaced
✔ Air filter element replaced (inner/outer)
✔ Coolant flushed and refilled (Cummins extended life)
✔ A/C system cleaned, re‑gassed, and tested
✔ Bucket cylinder pin and linkage pins replaced (preventive)
✔ Complete greasing – all pins, swing bearing, travel motors
✔ Batteries tested – OK

Why Choose This Hyundai R220LC-9S?

✅ Excellent condition for its age – 6,000 hours but with the care of a single owner. Many machines at this hour count show significantly more wear.
✅ Great fuel economy – The QSB6.7 engine and CAPO system deliver among the best fuel consumption in the 22t class.
✅ Globally supported engine and hydraulics – Cummins and Kawasaki parts are available almost everywhere, unlike some OEM‑specific components.
✅ Competitive price – Priced at USD 56,000 (FOB China). A new Hyundai R220LC‑10 costs over USD 190,000. You save 70%+.
✅ Rich Reach quality guarantee – Full transparency, on‑site or video inspection, simple T/T payment, no L/C. We never hide defects.

Inspection & Trial – Welcome

We invite you to inspect this machine at our Hefei facility. You can:

• Cold start and listen to the quiet Cummins engine
• Check the undercarriage for yourself – we guarantee 70%+ life remaining
• Operate all functions – dig, swing, travel – to feel the responsive hydraulics
• Sit in the cab and test the A/C, monitor, and joysticks

If you cannot travel, we will arrange a live video walk‑around and function test via WhatsApp/WeChat. We will show you the hour meter, start the engine, and cycle all movements on camera.

Pricing & Delivery

List price (FOB China): USD 56,000
CIF to major ports: Please contact us for a quote. Typical addition for ocean freight, extended insurance, and export clearance: USD 5,500‑8,500.
Delivery lead time: 10 days after payment for loading, plus 30‑50 days sea transit.

Payment terms: 50% deposit after inspection (or video confirmation), 50% balance upon receipt of scanned Bill of Lading. No L/C. For repeat customers, 100% T/T before shipment is also accepted.

Rich Reach – Your Hyundai Specialist

We export used Hyundai excavators to world markets, backed by honest condition reports and after‑sales support. This R220LC‑9S is an exceptional example – low hours, excellent maintenance, and ready to work. Contact us quickly because machines in this condition do not stay available long.

Contact Rich Reach

Email: sales-01@richreach.cn  |  amy@richreach.cn
Phone / WhatsApp:
Frida: +86 18110289118
Amy: +86 18297527921

Our Location:
Approx. 150m east of Baogong Ave & Dazhong Rd intersection, Longgang Comprehensive Economic Development Zone, Yaohui District, Hefei, Anhui (about 250m east of Poly Luolan Spring), China

Rich Reach – Quality used excavators, honestly described.